4 Panels | 13 ft H x 24 in W Each

Your mural is designed as a 4-panel repeating installation labeled A, B, C, and D. Proper placement ensures the artwork aligns seamlessly across your wall.

FIND YOUR CENTER

Measure the full width of your wall

Mark the exact center point

Using a level, draw a straight vertical line from ceiling to floor

START WITH PANELS B + C
The two center panels, B and C, install first.

Panel B installs to the left of your center line

Panel C installs to the right of your center line

Align the inside edges of B and C directly along the center guideline

Use a level to ensure each panel hangs perfectly straight

Starting in the middle allows the mural to expand evenly outward for a symmetrical, professional finish.

INSTALL PANELS A + D
Once B and C are installed:

Panel A installs to the left of Panel B

Panel D installs to the right of Panel C

Carefully align pattern edges as you go to maintain seamless artwork flow.

ADJUST HEIGHT + TRIM
Each panel arrives 13 feet tall to allow flexibility for various ceiling heights.

Roll out each panel before installing

Decide where you would like the artwork to sit vertically

Trim excess material at the top or bottom as needed

Always leave a small amount for final trimming once applied

Pro Tip: If your ceilings are shorter than 13 ft, you can shift the mural up or down before trimming to highlight your favorite portion of the design.

Important Notes • Install on a smooth, clean, dry surface